Chapter 4 Maintenance

Figure 56 IES-5106M/IES-5112M Fan Module (Location of Fuse Indicated)

4.1.2Procedure to Remove and Install the IES-6000M Fan Module

The IES main chassis has a hot-swappable fan module. The IES-6000M fan module is located above the slots and below the power modules on the front panel. Replace the entire fan module if the fuse is not the problem. Return any malfunctioning fan modules to the manufacturer.

Perform the following procedure to remove the fan module in order to change a fan fuse or the fan module.

1Loosen the thumbscrews on the front of the fan module.

2Slide out the fan module.

3Replace the fuse if it is burnt out (see Chapter 5 on page 75 for fuse information). If the fuse is not the problem, use a different fan module from the manufacturer.

4Slide the fan module back into the fan module slot.

5Tighten the thumbscrews.

 

69

IES-5106M / IES-5112M / IES-6000M User’s Guide