4

Maintenance

This chapter describes how to perform maintenance on the system hardware.

4.1 Fan Maintenance

This section describes how to change a fan fuse or a fan module on the IES.

4.1.1Procedure to Remove and Install the IES-5106M/IES- 5112M Fan Module

The IES main chassis has a hot-swappable fan module. The fan module is at the left on the front panel. Replace the entire fan module if the fuse is not the problem. Return any malfunctioning fan modules to the manufacturer.

Perform the following procedure to remove the fan module in order to clean the fan filter or change a fan fuse or the fan module.

1Loosen the thumbscrews on the front of the fan module.

2Slide out the fan module.

3Replace the fuse if it is burnt out (see Chapter 5 on page 75 for fuse information). If the fuse is not the problem, use a different fan module from the manufacturer.

4Slide out the fan filter. Clean or replace the filter.

5Slide the fan filter back into the fan module.

6Slide the fan module back into the fan module slot.

7Tighten the thumbscrews.

 

67

IES-5106M / IES-5112M / IES-6000M User’s Guide