Chapter 4 Maintenance

Figure 61 Removing the IES-6000M Air Filters

4.2 Power Maintenance

This section describes how to change the power modules. The power modules have a built-in circuit breaker. Before you replace a power module, make sure the circuit breaker is not causing the problem.

4.2.1 Procedure to Disconnect the Power

The power modules are hot-swappable and can be disconnected from the power supply individually.

1Make sure that the power module you want to disconnect has the power switch in the OFF position.

2Turn off the power supply.

3Disconnect the power wires from the power supply’s power terminals.

72

 

IES-5106M / IES-5112M / IES-6000M User’s Guide