ZyXEL Communications IES-5106M, IES-5112M, IES-6000M 2.6.4.1 MDF Installation Scenario A

Chapter 2 Hardware Installation and Connections

Figure 39 Installation Overview Example

You can also attach RJ-11 connectors to the Telco-50 cable and connect directly to a DSL modem(s) or patch panel. The following sections describe typical installation scenarios.

2.6.4.1 MDF Installation Scenario A

You want to install the IES in an environment where there are no previously installed MDFs. There is no phone service and you want to install the IES for data- access only. No connection from the Telco-50 CO connector is necessary. G.SHDSL connections carry data only, thus they are best suited to this installation scenario.

You may connect using an MDF or attach RJ-11 connectors to the non-IES end of the Telco-50 cable and then connect to DSL modems directly.

	49
IES-5106M / IES-5112M / IES-6000M User’s Guide	49