Chapter 2 Hardware Installation and Connections
Figure 25 Tightening Splitter Chassis Card Thumbscrews
2.3.4 Removing a Splitter Chassis Card
Use the following procedure to remove a splitter or extension card from the splitter chassis.
1Disconnect the cable from the card.
2Loosen the two thumbscrews.
3Grasp the handles on the front panel of the card and start to pull the card out.
4After you have the card partially out of the splitter chassis, place one hand under the card to support it.
5Slide the card out of the slot.
32 |
| |
| ||
|
|
|