Chapter 2 Hardware Installation and Connections

Figure 11 Attaching Mounting Brackets to the IES-6000M

4Position a mounting bracket (that is already attached to the main chassis) on one side of the rack, lining up the screw holes on the bracket with the screw holes on the side of the rack.

5Use the screwdriver to install the screws through the mounting bracket holes into the rack.

6Repeat steps 4-5to attach the second mounting bracket on the other side of the rack.

2.2.3Connecting the IES-5106M/IES-5112M Frame Ground

Refer to Chapter 5 on page 75 for the ground wire gauge.

•The IES-5106M/IES-5112M frame ground is on the upper right corner of the front panel.

•The IES-5005ST, IES-5000ST or IES-5002ST frame ground is near the lower left of the rear panel.

•Connect the frame grounds to a building’s protective earthing terminals using a green-and-yellow frame ground wire.

Warning! Connect the frame ground before you connect any other cables or wiring.

 

23

IES-5106M / IES-5112M / IES-6000M User’s Guide