ZyXEL Communications IES-5106M, IES-5112M, IES-6000M manual 34

Chapter 2 Hardware Installation and Connections

the wrong length blocks access to other cards. See the specifications appendix for the lengths of ZyXEL’s optional Telco-50 cables.

Use a long Telco-50 cable to connect a line card’s 1-24Telco-50 connector to the Telco-50 connector on the corresponding splitter card in the left column (labeled x-1) of the splitter chassis.

Use a short Telco-50 cable to connect a line card’s 25-48Telco-50 connector to the Telco-50 connector on the corresponding splitter card in the right column (labeled x-2) of the splitter chassis.

When using 48-port line cards (such as the ALC1248G), use an IES-5005ST (for IES-5106M) or IES-5000ST (for IES-5112M) splitter card chassis in conjunction with an IES-5002ST splitter card chassis, as shown in the following figures.

Figure 28 IES-5106M Front Panel Telco-50 Connections (with 5 Line Cards)

34
	IES-5106M / IES-5112M / IES-6000M User’s Guide