ZyXEL Communications MES3500-24, MES3500-24F 13.6 Configure Multiple Rapid Spanning Tree Protocol, Tree, Times, Change, in the, Status, Port ID, (second), screen. See, Cost to Bridge, Time Since Last

	Chapter 13 Spanning Tree Protocol
Table 29 Advanced Application > Spanning Tree Protocol > Status: RSTP (continued)
LABEL	DESCRIPTION
Forwarding Delay	This is the time (in seconds) the root switch will wait before changing states
(second)	(that is, listening to learning to forwarding). See Section 13.1.3 on page 123 for
	information on port states.
	Note: The listening state does not exist in RSTP.
Cost to Bridge	This is the path cost from the root port on this Switch to the root switch.
Port ID	This is the priority and number of the port on the Switch through which this
	Switch must communicate with the root of the Spanning Tree.
Topology Changed	This is the number of times the spanning tree has been reconfigured.
Times
Time Since Last	This is the time since the spanning tree was last reconfigured.
Change

13.6 Configure Multiple Rapid Spanning Tree Protocol

To configure MRSTP, click MRSTP in the Advanced Application > Spanning Tree Protocol screen. See Section 13.1 on page 122 for more information on MRSTP.

Figure 61 Advanced Application > Spanning Tree Protocol > MRSTP

The following table describes the labels in this screen.

Table 30 Advanced Application > Spanning Tree Protocol > MRSTP

LABEL	DESCRIPTION
Status	Click Status to display the MRSTP Status screen (see Figure 60 on page 130).
Tree	This is a read-only index number of the STP trees.

	131
MES3500-24/24F User’s Guide