Chapter 37 Maintenance

Be sure to upload the correct model firmware as uploading the wrong model firmware may damage your device.

37.8.2 FTP Command Line Procedure

1Launch the FTP client on your computer.

2Enter open, followed by a space and the IP address of your Switch.

3Press [ENTER] when prompted for a username.

4Enter your password as requested (the default is “1234”).

5Enter bin to set transfer mode to binary.

6Use put to transfer files from the computer to the Switch, for example, put firmware.bin ras-0transfers the firmware on your computer (firmware.bin) to the Switch and renames it to “ras-0”. Similarly, put config.cfg config transfers the configuration file on your computer (config.cfg) to the Switch and renames it to “config”. Likewise get config config.cfg transfers the configuration file on the Switch to your computer and renames it to “config.cfg”. See Table 117 on page 287 for more information on filename conventions.

7Enter quit to exit the ftp prompt.

37.8.3GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.

General Commands for GUI-based FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to the

 

server for anonymous access. Anonymous logins will work only if your ISP

 

or service administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

Configuration and firmware files should be transferred in binary mode.

 

 

Initial Remote

Specify the default remote directory (path).

Directory

 

 

 

Initial Local Directory

Specify the default local directory (path).

 

 

37.8.4 FTP Restrictions

FTP will not work when:

• FTP service is disabled in the Service Access Control screen.

288

 

MES3500-24/24F User’s Guide