Chapter 41 Cluster Management

41.3 Clustering Management Configuration

Use this screen to configure clustering management. Click Management > Cluster Management > Configuration to display the next screen.

Figure 197 Management > Cluster Management > Configuration

The following table describes the labels in this screen.

Table 138 Management > Cluster Management > Configuration

LABEL

DESCRIPTION

Clustering

 

Manager

 

 

 

Active

Select Active to have this Switch become the cluster manager switch. A cluster can only have

 

one manager. Other (directly connected) switches that are set to be cluster managers will not

 

be visible in the Clustering Candidates list. If a switch that was previously a cluster member

 

is later set to become a cluster manager, then its Status is displayed as Error in the Cluster

 

Management Status screen and a warning icon ( ) appears in the member summary list

 

below.

 

 

Name

Type a name to identify the Clustering Manager. You may use up to 32 printable characters

 

(spaces are allowed).

 

 

320

 

MES3500-24/24F User’s Guide