ZyXEL Communications MES3500-24, MES3500-24F 40.2 Syslog Setup, Apply, Syslog, Active, Cancel, Facility, Logging Type, Chapter 40 Syslog, Table 133 Management > Syslog, Figure 191 Management > Syslog

Chapter 40 Syslog

40.2 Syslog Setup

Click Management > Syslog in the navigation panel to display this screen. The syslog feature sends logs to an external syslog server. Use this screen to configure the device’s system logging settings.

Figure 191 Management > Syslog

The following table describes the labels in this screen.

Table 133 Management > Syslog

LABEL	DESCRIPTION
Syslog	Select Active to turn on syslog (system logging) and then configure the syslog setting
Logging Type	This column displays the names of the categories of logs that the device can generate.
Active	Select this option to set the device to generate logs for the corresponding category.
Facility	The log facility allows you to send logs to different files in the syslog server. Refer to the
	documentation of your syslog program for more details.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top navigation panel to
	save your changes to the non-volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.

314
	MES3500-24/24F User’s Guide