Chapter 6 Easy Mode
NBG-419N User’s Guide
52
Click Status to open the following screen screen.
Figure 27 Easy Mode: Status Screen
6.2 What You Can DoYou can do the following in this mode:
•Use this Navigation Panel (Section 6.4 on page 53) to opt out of the Easy
mode.
•Use the Network Map screen (Section 6.5 on page 53) to check if your NBG-
419N can ping the gateway and whether it is connected to the Internet.
•Use the Control Panel (Section 6.6 on page 54) to configure and enable NBG-
419N features, including wireless security, wireless scheduling and bandwidth
management and so on.
•Use the Status Screen screen (Section 6.7 on page 61) to view read-only
information about the NBG-419N, including the WAN IP, MAC Address of the
NBG-419N and the firmware version.
6.3 What You Need to KnowBetween the different device modes, the Control Panel (Section 6.6 on page 54)
changes depending on which features are applicable to the mode:
•Router Mode: All Control Panel features are available.
Control Panel
Status Screen
Go to