Chapter 15 Zones

15.2 Zone Commands Summary

The following table describes the values required for many zone commands. Other values are discussed with the corresponding commands.

Table 48 Input Values for Zone Commands

LABEL

DESCRIPTION

profile_name

The name of a zone.

 

Use up to 31 characters (a-zA-Z0-9_-). The name cannot start with a number.

 

This value is case-sensitive.

 

 

This table lists the zone commands.

Table 49 zone Commands

COMMAND

DESCRIPTION

show zone [profile_name]

Displays information about the specified zone or about

 

all zones.

show zone binding-iface

Displays each interface and zone mappings.

show zone none-binding

Displays the interfaces that are not associated with a

 

zone yet.

show zone user-define

Displays all customized zones.

[no] zone profile_name

Creates the zone if necessary and enters sub-

 

command mode. The no command deletes the zone.

zone profile_name

Enter the sub-command mode.

[no] block

Blocks intra-zone traffic. The no command allows intra-

 

zone traffic.

[no] interface interface_name

Adds the specified interface to the specified zone. The

 

no command removes the specified interface from the

 

specified zone.

exit

Exits the sub-command mode for this zone.

108

 

NXC CLI Reference Guide