Chapter 23 Device HA

Table 94 device-ha ap-mode Commands (continued)

COMMAND

DESCRIPTION

[no] device-ha ap-mode authentication {string

Sets the authentication method the virtual router

key ah-md5 key}

uses. Every interface in a virtual router must use

 

the same authentication method and password.

 

The no command disables authentication.

 

string: Use a plain text password for

 

authentication. key - Use up to eight characters

 

including alphanumeric characters, the underscore,

 

and some punctuation marks (+-/*= :; .! @$&%#~ ‘

 

\ () ).

 

ah-md5: Use an encrypted MD5 password for

 

authentication. key - Use up to eight characters

 

including alphanumeric characters, the underscore,

 

and some punctuation marks (+-/*= :; .! @$&%#~ ‘

 

\ () ).

 

 

[no] device-ha ap-mode interface_name manage-

Sets the management IP address for an interface.

ip ip subnet_mask

 

[no] device-ha ap-mode interface_name activate

Has device HA monitor the status of an interface’s

 

connection.

[no] device-ha ap-mode master sync

This is for a master NXC. It specifies the password

authentication password password

to require from synchronizing backup NXCs. Every

 

router in the virtual router must use the same

 

password. The no command sets the password

 

setting to blank (which means no backups can

 

synchronize with this master).

 

password: Use 4-63 alphanumeric characters,

 

underscores (_), dashes (-), and #%^*={}:,.~

 

characters.

[no] device-ha ap-mode backup sync

Sets the password the backup NXC uses when

authentication password password

synchronizing with the master. The no command

 

sets the password setting to blank (which means

 

this backup NXC cannot synchronize with the

 

master).

 

password: Use 4-63 alphanumeric characters,

 

underscores (_), dashes (-), and #%^*={}:,.~

 

characters.

[no] device-ha ap-mode backup sync auto

Turns on automatic synchronization according to

 

the interval you specify in device-haap-mode

 

backup sync interval. The first

 

synchronization begins after the specified interval

 

(not immediately).

 

 

[no] device-ha ap-mode backup sync interval

When you use automatic synchronization, this sets

<5..1440>

how often (in minutes) the NXC synchronizes with

 

the master.

[no] device-ha ap-mode backup sync from

Sets the address of the master NXC with which this

master_address port <1..65535>

backup NXC is to synchronize.

 

master_address: The master NXC’s IP address

 

or fully-qualified domain name (FQDN).

 

port: The master NXC’s FTP port number.

 

 

device-ha ap-mode backup sync now

Synchronize now.

show device-ha ap-mode interfaces

Displays the device HA AP mode interface settings

 

and status.

show device-ha ap-mode status

Displays the NXC’s key device HA settings.

166

 

NXC CLI Reference Guide