ZyXEL Communications NOT AVAILABLE Status, 4.1 Status Show Commands

4

Status

This chapter explains some commands you can use to display information about the NXC’s current operational state.

4.1 Status Show Commands

The following table describes the commands available for NXC system status.

Table 8 Status Show Commands

COMMAND	DESCRIPTION
show boot status	Displays details about the NXC’s startup state.
show comport status	Displays whether the console and auxiliary ports are on or off.
show cpu status	Displays the CPU utilization.
show disk	Displays the disk utilization.
show extension-slot	Displays the status of the extension card slot and the USB ports and the names of
	any connected devices.
show fan-speed	Displays the current fan speed.
show led status	Displays the status of each LED on the NXC.
show mac	Displays the NXC’s MAC address.
show mem status	Displays what percentage of the NXC’s memory is currently being used.
show ram-size	Displays the size of the NXC’s on-board RAM.
show serial-number	Displays the serial number of this NXC.
show socket listen	Displays the NXC’s listening ports
show socket open	Displays the ports that are open on the NXC.
show system uptime	Displays how long the NXC has been running since it last restarted or was turned
	on.
show version	Displays the NXC’s model, firmware and build information.

	37
NXC CLI Reference Guide