
Chapter 5 Registration
5.2 Registration Commands
The following table identifies the values required for many of these commands. Other input values are discussed with the corresponding commands.
Table 9 Input Values for General Registration Commands
LABEL | DESCRIPTION |
user_name | The user name of your myZyXEL.com account. You may use six to 20 |
| alphanumeric characters (and the underscore). Spaces are not allowed. |
|
|
password | The password for the myZyXEL.com account. You may use six to 20 |
| alphanumeric characters (and the underscore). Spaces are not allowed. |
|
|
The following table describes the commands available for registration. You must use the configure terminal command to enter the configuration mode before you can use these commands.
Table 10 Command Summary: Registration
COMMAND | DESCRIPTION |
Checks if the user name exists in the | |
| myZyXEL.com database. |
Registers the device with an existing account or | |
password | creates a new account and registers the device at |
country_code] | one time. |
country_code: see Table 11 on page 44 | |
vat_number: your seller’s | |
vat_number] | number, if you bought your NXC from Europe. |
Gets information of all service subscriptions from | |
| myZyXEL.com and updates the status table. |
Activates a standard service subscription with the | |
key key_value | license key. |
Activates the content filter or IDP trial service | |
{allavidp} | subscription. |
Activates all of the trial service subscriptions, | |
{kavzav} | including Kaspersky or ZyXEL |
Activates a Kaspersky or ZyXEL | |
{kavzav} | service subscription. |
Changes from one | |
{kavzav} |
|
show | Displays whether the device is registered and |
| account information. |
show | Displays service license information. |
| 43 |
NXC CLI Reference Guide | |
|
|