
Chapter 3 Object Reference
Table 7 show reference Commands (continued)
COMMAND | DESCRIPTION |
show reference | Displays which configuration settings reference the |
radius [group_name] | specified AAA RADIUS group object. |
show reference object [wlan- | Displays the specified radio profile object. |
| |
show reference object [wlan- | Displays the specified monitor profile object. |
| |
show reference object [wlan- | Displays the specified SSID profile object. |
| |
show reference object [wlan- | Displays the specified security profile object. |
| |
show reference object [wlan- | Displays the specified macfilter profile object. |
|
3.1.1 Object Reference Command Example
This example shows how to check which configuration is using an address object named LAN1_SUBNET. For the command output, firewall rule 3 named
Router(config)# show reference object address LAN1_SUBNET
LAN1_SUBNET References:
Category | Rule Name |
Rule Priority |
Description
===========================================================================
Firewall
3N/A
36 |
| |
NXC CLI Reference Guide |
| |
|
|
|