Chapter 36 Logs

36.1.1 Log Entries Commands

This table lists the commands to look at log entries.

Table 138 logging Commands: Log Entries

COMMAND

DESCRIPTION

show logging entries [priority pri] [category

Displays the selected entries in the system log.

module_name] [srcip ip] [dstip ip] [service

PRI: alert crit debug emerg error info notice

service_name] [begin <1..512> end <1..512>]

warn

[keyword keyword]

keyword: You can use alphanumeric and ()+/

 

:=?!*#@$_%- characters, and it can be up to 63

 

characters long. This searches the message,

 

source, destination, and notes fields.

 

 

show logging entries field field [begin

Displays the selected fields in the system log.

<1..512> end <1..512>]

field: time msg src dst note pri cat all

36.1.2 System Log Commands

This table lists the commands for the system log settings.

Table 139 logging Commands: System Log Settings

COMMAND

DESCRIPTION

show logging status system-log

Displays the current settings for the system log.

logging system-log category module_name

Specifies what kind of information, if any, is logged

{disable level normal level all}

in the system log and debugging log for the

 

specified category.

[no] logging system-log suppression interval

Sets the log consolidation interval for the system

<10..600>

log. The no command sets the interval to ten.

[no] logging system-log suppression

Enables log consolidation in the system log. The

 

no command disables log consolidation in the

 

system log.

[no] connectivity-check continuous-log

Has the NXC generate a log for each connectivity

activate

check. The no command has the NXC only log the

 

first connectivity check.

show connectivity-check continuous-log status

Displays whether or not the NXC generates a log

 

for each connectivity check.

clear logging system-log buffer

Clears the system log.

242

 

NXC CLI Reference Guide