Chapter 1 Command Line Interface

The NXC might force you to log out of your session if reauthentication time, lease time, or idle timeout is reached. See Chapter 24 on page 169 for more information about these settings.

1.2.1Console Port

The default settings for the console port are as follows.

Table 1 Managing the NXC: Console Port

SETTING

VALUE

Speed

115200 bps

 

 

Data Bits

8

 

 

Parity

None

 

 

Stop Bit

1

 

 

Flow Control

Off

 

 

When you turn on your NXC, it performs several internal tests as well as line initialization. You can view the initialization information using the console port.

•Garbled text displays if your terminal emulation program’s speed is set lower than the NXC’s.

•No text displays if the speed is set higher than the NXC’s.

•If changing your terminal emulation program’s speed does not get anything to display, restart the NXC.

•If restarting the NXC does not get anything to display, contact your local customer support.

Figure 1 Console Port Power-on Display

Flash: 8 MiB

BootModule Version: V0.9.1 2012-12-28 13:01:22

DRAM: Size = 1024 Mbytes

DRAM POST: Testing: 262144K

After the initialization, the login screen displays.

Figure 2 Login Screen

Welcome to NXC

Username:

16

 

NXC CLI Reference Guide