| Chapter 8 AP Management |
|
|
Table 29 Command Summary: AP Management (continued) | |
COMMAND | DESCRIPTION |
slot_name | Sets the specified radio (slot_name) to monitor mode |
profile_name | and assigns a created profile to the radio. Monitor mode |
| APs act as wireless monitors, which can detect rogue |
| APs and help you in building a list of friendly ones. See |
| also Section 9.2 on page 77. |
|
|
no slot_name | Removes the monitor mode profile assignment for the |
| specified radio (slot_name). |
description ap_description | Sets the description for the specified AP. |
[no] force vlan | Sets whether or not the NXC changes the AP’s |
| management VLAN to match the one you configure using |
| the vlan |
| NXC and AP must match for the NXC to manage the AP. |
| This takes priority over the AP’s CAPWAP client |
| commands described in Chapter 43 on page 271. |
|
|
vlan <1..4094> {tag untag} | Sets the VLAN ID for the specified AP as well as whether |
| packets sent to and from that ID are tagged or untagged. |
exit | Exits the |
show capwap ap | Displays a list of connected but |
| APs. This is known as the ‘wait list’. |
show capwap ap {all ap_mac} | Displays the management list (all) or whether the |
| specified AP is on the management list (ap_mac). |
show capwap ap all statistics | Displays radio statistics for all APs on the management |
| list. |
show capwap ap ap_mac slot_name detail | Displays details for the specified radio (slot_name) on |
| the specified AP (ap_mac). |
show capwap ap {all ap_mac} config | Displays whether or not any AP’s configuration or the |
status | specified AP’s configuration is in conflict with the NXC’s |
| settings for the AP and displays the settings in conflict if |
| there are any. |
|
|
show capwap station all | Displays information for all stations connected to the APs |
| on the management list. |
capwap station kick sta_mac | Forcibly disconnects the specified station from the |
| network. |
| 75 |
NXC CLI Reference Guide | |
|
|