
| Chapter 26 Services |
|
|
Table 107 | |
COMMAND | DESCRIPTION |
[no] | Adds the specified service group (second |
| group_name) to the specified service group (first |
| group_name). The no command removes the |
| specified service group from the specified service |
| group. |
|
|
[no] description description | Sets the description to the specified value. The no |
| command removes the description. |
| description: You can use alphanumeric and |
| ()+/:=?!*#@$_%- characters, and it can be up |
| to 60 characters long. |
Renames the specified service group from the first | |
group_name | group_name to the second group_name. |
|
|
26.2.2.1 Service Group Command Examples
The following commands create service ICMP_ECHO, create service group SG1, and add ICMP_ECHO to SG1.
Router# configure terminal
Router(config)#
Router(config)#
|
| |
Router(config)# show | Minmum port Maxmum port Ref. | |
Object name | Protocol |
===========================================================================
ICMP_ECHO | ICMP | 8 | 8 | 1 |
ICMP_ECHO References: |
|
|
|
|
Category | Rule Name Description |
|
|
|
Rule Priority |
|
|
|
===========================================================================
Service Group
N/A | SG1 | N/A |
Router(config)# show | ||
Object/Group name |
| Type Reference |
===========================================================================
ICMP_ECHO | Object 1 |
Router(config)# |
|
| 183 |
NXC CLI Reference Guide | |
|
|