ZyXEL Communications NOT AVAILABLE manual 172

Chapter 24 User/Group

Table 99 username/groupname Commands Summary: Settings (continued)

COMMAND	DESCRIPTION
users default-setting [no] user-type <admin	Sets the default user type for each new user. The
ext-userguestlimited-adminext-group-user>	no command sets the default user type to user.
show users retry-settings	Displays the current retry limit settings for users.
[no] users retry-limit	Enables the retry limit for users. The no command
	disables the retry limit.
[no] users retry-count <1..99>	Sets the number of failed login attempts a user can
	have before the account or IP address is locked out
	for lockout-period minutes. The no command sets
	the retry-count to five.
[no] users lockout-period <1..65535>	Sets the amount of time, in minutes, a user or IP
	address is locked out after retry-count number of
	failed login attempts. The no command sets the
	lockout period to thirty minutes.
show users simultaneous-logon-settings	Displays the current settings for simultaneous
	logins by users.
[no] users simultaneous-logon {administration	Enables the limit on the number of simultaneous
access} enforce	logins by users of the specified account-type. The
	no command disables the limit, or allows an
	unlimited number of simultaneous logins.
[no] users simultaneous-logon {administration	Sets the limit for the number of simultaneous logins
access} limit <1..1024>	by users of the specified account-type. The no
	command sets the limit to one.
show users update-lease-settings	Displays whether or not access users can
	automatically renew their lease time.
[no] users update-lease automation	Lets users automatically renew their lease time.
	The no command prevents them from
	automatically renewing it.
show users idle-detection-settings	Displays whether or not users are automatically
	logged out, and, if so, how many minutes of idle
	time must pass before they are logged out.
[no] users idle-detection	Enables logging users out after a specified number
	of minutes of idle time. The no command disables
	logging them out.
[no] users idle-detection timeout <1..60>	Sets the number of minutes of idle time before
	users are automatically logged out. The no
	command sets the idle-detection timeout to three
	minutes.

24.2.3.1 User Setting Command Examples

The following commands show the current settings for the number of simultaneous logins.

Router# configure terminal

Router(config)# show users simultaneous-logon-settings

enable simultaneous logon limitation for administration account: yes

maximum simultaneous logon per	administration	account	: 1
enable simultaneous logon limitation for access account			: yes
maximum simultaneous logon per	access account		: 3

172
	NXC CLI Reference Guide