11
IP Screen
11.1 Overview
This chapter describes how you can configure the IP address of your NWA.
The Internet Protocol (IP) address identifies a device on a network. Every networking device (including computers, servers, routers, printers, etc.) needs an IP address to communicate across the network. These networking devices are also known as hosts.
Figure 50 IP Setup
The figure above illustrates one possible setup of your NWA. The gateway IP address is 192.168.1.2 and the IP address of the NWA is 192.168.1.2 (default). The gateway and the device must belong in the same subnet mask to be able to communicate with each other.
11.2 What You Can Do in this Chapter
Use the IP screen to configure the IP address of your NWA (see Section 11.4 on page 106).
11.3 What You Need to Know
The Ethernet parameters of the NWA are preset in the factory with the following values:
1IP address of 192.168.1.2
2Subnet mask of 255.255.255.0 (24 bits)
| 105 |
|
|