Chapter 6 Wireless Settings Screen
6.4.4 Wireless Client Mode
Use this screen to turn your NWA into a wireless client. Select Wireless Client as the Operation Mode. The following screen displays.
Figure 27 Wireless > Wireless Settings: Wireless Client
The following table describes the general wireless LAN labels in this screen.
Table 13 Wireless > Wireless Settings: Wireless Client
LABEL | DESCRIPTION |
Basic Settings |
|
|
|
Operation Mode | Select Wireless Client in this field. |
|
|
Site Survey | Click this to view a list of available wireless access points within the range. Select |
| the AP you want to use and click Selected. |
| Note: After selecting Wireless Client as the Operation Mode in the Basic |
| Settings section, you must click Apply to be able to select from the AP list. |
|
|
Wireless Mode | Select 802.11b/g to allow both IEEE802.11b and IEEE802.11g compliant WLAN |
| devices to associate with the NWA. The transmission rate of your NWA might be |
| reduced. |
| Select 802.11b/g/n to allow IEEE802.11b, IEEE802.11g and IEEE802.11n |
| compliant WLAN devices to associate with the NWA. The transmission rate of the |
| NWA might be reduced. |
|
|
70 |
|
|
|