Chapter 12 Remote Management
timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the SYSTEM screen.
12.4 The Telnet Screen
Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the NWA’s Command Line Interface (CLI).
Click REMOTE MGNT > TELNET. The following screen displays.
Figure 54 Remote Management: Telnet
The following table describes the labels in this screen.
Table 37 Remote Management: Telnet
LABEL | DESCRIPTION |
TELNET |
|
|
|
Server Port | You can change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
|
|
Server | Select the interface(s) through which a computer may access the NWA using |
Access | Telnet. |
|
|
Secured | A secured client is a “trusted” computer that is allowed to communicate with the |
Client IP | NWA using this service. |
Address |
|
| Select All to allow any computer to access the NWA using this service. |
| Choose Selected to just allow the computer with the IP address that you specify |
| to access the NWA using this service. |
|
|
Secured | Select All to allow any computer to access the NWA using this service. |
Client MAC |
|
Address | Choose Selected to just allow the computer with the MAC address that you |
| specify to access the NWA using this service. |
|
|
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
12.5 The FTP Screen
Use this screen to upload and download the NWA’s firmware using FTP. To use this feature, your computer must have an FTP client.
112 |
|
|
|