2
Introducing the Web Configurator
This chapter describes how to access the NWA’s web configurator and provides an overview of its screens.
2.1Accessing the Web Configurator
1Make sure your hardware is properly connected and prepare your computer or computer network to connect to the NWA (refer to the Quick Start Guide).
2Launch your web browser.
3Type "192.168.1.2" as the URL (default). The login screen appears. Figure 11 The Login Screen
4Type “admin” as the (default) username and “1234” as the (default) password. Click Login.
5You should see a screen asking you to change your password (highly recommended) as shown next. Type a new password (and retype it to confirm) then click Apply. Alternatively, click Ignore.
Note: If you do not change the password, the following screen appears every time you login.
Figure 12 Change Password Screen
| 29 |
|
|