Chapter 6 Wireless Settings Screen
Table 12 Wireless > Wireless Settings: Bridge/Repeater (continued)
LABEL | DESCRIPTIONS |
Rates Configuration | This section controls the data rates permitted for clients. |
| For each Rate, select an option from the Configuration list. The options |
| are: |
| • Basic (1~11 Mbps only): Clients can always connect to the access point |
| at this speed. |
| • Optional: Clients can connect to the access point at this speed, when |
| permitted to do so by the AP. |
| • Disable: Clients cannot connect to the access point at this speed. |
|
|
MCS Table | The MCS Rate table is available only when 802.11 b/g/n is selected in the |
| 802.11 Wireless Mode field. |
| IEEE 802.11n supports many different data rates which are called MCS rates. |
| MCS stands for Modulation and Coding Scheme. This is an 802.11n feature |
| that increases the wireless network performance in terms of throughput. |
| For each MCS Rate |
| use the data rate. Select Disable if you do not want the NWA to use the data |
| rate. |
|
|
Apply | Click Apply to save your changes. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
68 |
|
|
|