Chapter 12 Remote Management
12.7 The SNMP Screen
Use this screen to have a manager station administrate your NWA over the network. To change your NWA’s SNMP settings, click REMOTE MGMT > SNMP. The following screen displays.
Figure 57 Remote Management: SNMP
The following table describes the labels in this screen.
Table 40 Remote Management: SNMP
LABEL | DESCRIPTION |
SNMP Configuration |
|
|
|
Get Community | Enter the Get Community, which is the password for the incoming Get and |
| GetNext requests from the management station. |
|
|
Set Community | Enter the Set community, which is the password for incoming Set requests |
| from the management station. |
|
|
Trap Destination | Type the IP address of the station to send your SNMP traps to. |
|
|
Trap Community | Type the trap community, which is the password sent with each trap to the |
| SNMP manager. |
| This field is available only when SNMPv1 or SNMPv2 is selected in the SNMP |
| Version field. |
|
|
Configure SNMPv3 | Click this to go to the SNMPv3 User Profile screen, where you can configure |
User Profile | administration and user login details. |
|
|
SNMP |
|
|
|
Service Port | You may change the server port number for a service if needed, however you |
| must use the same port number in order to use that service for remote |
| management. |
|
|
Service Access | Select the interface(s) through which a computer may access the NWA using |
| this service. |
|
|
| 115 |
|
|