Chapter 15 Maintenance
The following table describes the labels in this screen.
Table 48 | Firmware Upload | |
LABEL |
| DESCRIPTION |
File Path |
| Type in the location of the file you want to upload in this field or click Browse |
|
| ... to find it. |
|
|
|
Browse... |
| Click Browse... to find the .bin file you want to upload. Remember that you |
|
| must decompress compressed (.zip) files before you can upload them. |
|
|
|
Upload |
| Click Upload to begin the upload process. This process may take up to two |
|
| minutes. |
|
|
|
After you see the Firmware Upload in Process screen, wait two minutes before logging into the NWA again.
Figure 68 Firmware Upload In Process
The NWA automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 69 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the F/ W Upload screen.
Figure 70 Firmware Upload Error
132 |
|
|
|