ZyXEL Communications NWA1100-N manual 126

Chapter 14 Log Screens

The following table describes the labels in this screen.

Table 45 Log Settings

LABEL	DESCRIPTION
Address Info
Mail Server	Enter the server name or the IP address of the mail server for the e-mail
	addresses specified below. If this field is left blank, logs and alert messages
	will not be sent via e-mail.
Mail Subject	Type a title that you want to be in the subject line of the log e-mail message
	that the NWA sends.
Send Log to	Logs are sent to the e-mail address specified in this field. If this field is left
	blank, logs will not be sent via e-mail.
SMTP Authentication	If you use SMTP authentication, the mail receiver should be the owner of the
	SMTP account.
User Name	If your e-mail account requires SMTP authentication, enter the username
	here.
Password	Enter the password associated with the above username.
Syslog Logging	Syslog logging sends a log to an external syslog server used to store logs.
Active	Click Active to enable syslog logging.
Syslog IP Address	Enter the IP address of the syslog server that will log the selected categories
	of logs.
Syslog Port	Enter the port number of the syslog server that will log the selected
Number	categories of logs.
Send Log
Log Schedule	This drop-down menu is used to configure the frequency of log messages
	being sent as E-mail:
	•	Daily
	•	Weekly
	•	Hourly
	• When Log is Full
	•	None.
	If the Weekly or the Daily option is selected, specify a time of day when
	the E-mail should be sent. If the Weekly option is selected, then also
	specify which day of the week the E-mail should be sent. If the When Log is
	Full option is selected, an alert is sent when the log fills up. If you select
	None, no log messages are sent.
Day for Sending	This field is only available when you select Weekly in the Log Schedule
Log	field.
	Use the drop down list box to select which day of the week to send the logs.
Time for Sending	Enter the time of the day in 24-hour format (for example 23:00 equals
Log	11:00 pm) to send the logs.
Clear log after	Select the check box to clear all logs after logs and alert messages are sent
sending mail	via e-mail.
Log
System	Click this to receive logs related to system maintenance.
Maintenance
System Errors	Click this to receive logs related to system errors.
802.1x	Click this to receive logs related to the 802.1x mode.
Wireless	Click this to receive logs related to the wireless function.
Email log now	Select the categories of alerts for which you want the NWA to immediately
	send e-mail alerts.

126
	NWA1100-N User’s Guide