Chapter 12 Remote Management
To change your NWA’s FTP settings, click REMOTE MGMT > FTP. The following screen displays. Figure 55 Remote Management: FTP
The following table describes the labels in this screen.
Table 38 Remote Management: FTP
LABEL | DESCRIPTION |
FTP |
|
|
|
Server Port | You may change the server port number for a service if needed, however you |
| must use the same port number in order to use that service for remote |
| management. |
|
|
Server Access | Select the interface(s) through which a computer may access the NWA using this |
| service. |
|
|
Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the |
Address | NWA using this service. |
| Select All to allow any computer to access the NWA using this service. |
| Choose Selected to just allow the computer with the IP address that you specify |
| to access the NWA using this service. |
|
|
Secured Client | Select All to allow any computer to access the NWA using this service. |
MAC Address | Choose Selected to just allow the computer with the MAC address that you |
| |
| specify to access the NWAe using this service. |
|
|
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
12.6 The WWW Screen
Use this screen to configure your NWA via the World Wide Web (WWW) using a Web browser. This lets you specify which IP addresses or computers are able to communicate with and access the NWA.
| 113 |
|
|