|
| Chapter 3 Status Screens | |
|
|
|
|
| Table 3 The Status Screen (continued) | ||
| LABEL | DESCRIPTION |
|
| LAN | This field displays the number of wireless clients currently associated to |
|
|
| the first wireless module. Each wireless module supports up to 32 |
|
|
| concurrent associations. |
|
|
|
|
|
| WLAN | This field displays the number of wireless clients currently associated to |
|
|
| the second wireless module. Each wireless module supports up to 32 |
|
|
| concurrent associations. |
|
|
|
|
|
| System Status |
|
|
|
|
|
|
| Statistics | Click this link to view port status and packet specific statistics. See |
|
|
|
| |
|
|
|
|
| Association List | Click this to see a list of wireless clients currently associated to each of |
|
|
| the NWA’s wireless modules. See Section 15.4 on page 129. |
|
|
|
|
|
| View Log | Click this to see a list of logs produced by the NWA. See Chapter 14 on |
|
|
|
| |
|
|
|
|
3.1.1 System Statistics Screen
Use this screen to view
Click Status > Statistics. The following screen pops up.
Figure 16 System Status: Statistics
The following table describes the labels in this screen.
Table 4 System Status: Show Statistics
LABEL | DESCRIPTION |
Description | This is the wireless LAN adaptor. |
|
|
802.11 Mode | This field shows which 802.11 mode the NWA is using. |
|
|
Channel ID | Click this to see which wireless channels are currently in use in the local area. |
| |
|
|
RX PKT | This is the number of received packets on this port. |
|
|
TX PKT | This is the number of transmitted packets on this port. |
|
|
Retry Count | This is the total number of retries for transmitted packets (TX). |
|
|
FCS Error Count | This is the ratio percentage showing the total number of checksum error of |
| received packets (RX) over total RX. |
|
|
Poll Interval | Enter the time interval for refreshing statistics. |
|
|
Set Interval | Click this button to apply the new poll interval you entered above. |
|
|
Stop | Click this button to stop refreshing statistics. |
|
|
| 35 |
|
|