ZyXEL Communications NWA1100-N 8.4.2.2 Wireless Client

Chapter 8 Wireless Security Screen

Table 23 Security: 802.1x Only for Access Point (continued)

LABEL	DESCRIPTION
Reset	Click Reset to begin configuring this screen afresh.
Back	Click Back to return to the previous screen.

8.4.2.2 Wireless Client

Use this screen to use 802.1x-Only security mode for your NWA that is in Wireless Client operating mode. Select 802.1x-Onlyin the Security Mode field to display the following screen.

Figure 38 Security: 802.1x Only for Wireless Client

The following table describes the labels in this screen.

Table 24 Security: 802.1x Only for Wireless Client

LABEL	DESCRIPTION
Security Settings
Profile Name	This is the name that identifying this profile.
Security Mode	Choose the same security mode used by the AP.
Data Encryption	Select between None and Dynamic WEP. Refer to Appendix E on page 198 for
	information on using Dynamic WEP.
IEEE802.1x Authentication
EAP Type	The options on the left refer to EAP methods. You can choose either TLS, LEAP,
	PEAP or TTLS.
	The options on the right refer to authentication protocols. You can choose
	between MSCHAPv2 and GTC.
User Information
Username	Supply the username of the account created in the RADIUS server.
Password	Supply the password of the account created in the RADIUS server.
Apply	Click Apply to save your changes.
Reset	Click Reset to begin configuring this screen afresh.
Back	Click Back to return to the previous screen.

	91
NWA1100-N User’s Guide