P-334U/P-335U User’s Guide

 

Table 33 PPTP Encapsulation

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

Private

This parameter determines if the ZyXEL Device will include the route to this

 

 

remote node in its RIP broadcasts. If set to Yes, this route is kept private and

 

 

not included in RIP broadcast. If No, the route to this remote node will be

 

 

propagated to other hosts through RIP broadcasts.

 

DNS Servers

 

 

 

 

 

First DNS Server

Select From ISP if your ISP dynamically assigns DNS server information (and

 

Second DNS Server

the ZyXEL Device's WAN IP address). The field to the right displays the (read-

 

only) DNS server IP address that the ISP assigns.

 

Third DNS Server

 

Select User-Definedif you have the IP address of a DNS server. Enter the

 

 

 

 

DNS server's IP address in the field to the right. If you chose User-Defined,

 

 

but leave the IP address set to 0.0.0.0, User-Definedchanges to None after

 

 

you click Apply. If you set a second choice to User-Defined, and enter the

 

 

same IP address, the second User-Definedchanges to None after you click

 

 

Apply.

 

 

Select None if you do not want to configure DNS servers. If you do not

 

 

configure a DNS server, you must know the IP address of a computer in order

 

 

to access it.

 

WAN MAC Address

The MAC address section allows users to configure the WAN port's MAC

 

 

address by either using the ZyXEL Device’s MAC address, copying the MAC

 

 

address from a computer on your LAN or manually entering a MAC address.

 

Factory default

Select Factory default to use the factory assigned default MAC Address.

 

 

 

 

Clone the computer’s

Select Clone the computer's MAC address - IP Address and enter the IP

 

MAC address

address of the computer on the LAN whose MAC you are cloning. Once it is

 

 

successfully configured, the address will be copied to the rom file (ZyNOS

 

 

configuration file). It will not change unless you change the setting or upload a

 

 

different ROM file.

 

Set WAN MAC

Select this option and enter the MAC address you want to use.

 

Address

 

 

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

6.4 Advanced WAN Screen

To change your ZyXEL Device’s advanced WAN settings, click Network > WAN > Advanced. The screen appears as shown.

Chapter 6 WAN

103