
|
| |
| Table 18 Wizard Step 3: WAN IP and DNS Server Addresses | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| First DNS Server | Enter the DNS server's IP address in the fields provided. |
| Second DNS Server | If you do not configure a system DNS server, you must use IP addresses |
| Third DNS Server | when configuring DDNS and the time server. |
|
| |
|
|
|
| Back | Click Back to return to the previous screen. |
|
|
|
| Next | Click Next to continue. |
|
|
|
| Exit | Click Exit to close the wizard screen without saving. |
|
|
|
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Table 19 Example of Network Properties for LAN Servers with Fixed IP Addresses
Choose an IP address | |
|
|
Subnet mask | 255.255.255.0 |
|
|
Gateway (or default route) | 192.168.1.1(ZyXEL Device LAN IP) |
|
|
This screen allows users to configure the WAN port's MAC address by either using the ZyXEL Device’s MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address. Once it is successfully configured, the address will be copied to the "rom" file (ZyNOS configuration file). It will not change unless you change the setting or upload a different "rom" file. It is advisable to clone the MAC address from a computer on your LAN even if your ISP does not presently require MAC address authentication.
Figure 29 Wizard Step 3: WAN MAC Address
Chapter 3 Connection Wizard | 63 |