P-334U/P-335U User’s Guide

14.2 IP Static Route Screen

Click Management > Static Route to open the IP Static Route screen. The following screen displays.

Figure 101 IP Static Route

The following table describes the labels in this screen.

Table 59 IP Static Route

LABEL

DESCRIPTION

 

 

#

This is the index number of an individual static route. The first entry is for the

 

default route and not editable.

Name

This is the name that describes or identifies this route.

 

 

Active

This icon is turned on when this static route is active.

 

Click the Edit icon under Modify and select the Active checkbox in the Static

 

Route Setup screen to enable the static route. Clear the checkbox to disable this

 

static route without having to delete the entry.

Destination

This parameter specifies the IP network address of the final destination. Routing is

 

always based on network number.

Gateway

This is the IP address of the gateway. The gateway is an immediate neighbor of

 

your ZyXEL Device that will forward the packet to the destination. On the LAN, the

 

gateway must be a router on the same segment as your ZyXEL Device; over the

 

WAN, the gateway must be the IP address of one of the remote nodes.

Modify

Click the Edit icon to open the static route setup screen. Modify a static route or

 

create a new static route in the Static Route Setup screen.

 

Click the Remove icon to delete a static route.

 

 

170

Chapter 14 Static Route Screens