P-334U/P-335U User’s Guide

Table 25 Wireless: Static WEP Encryption

LABEL

DESCRIPTION

 

 

Key 1 to Key 4

The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless

 

stations must use the same WEP key for data transmission.

 

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal

 

characters ("0-9", "A-F").

 

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal

 

characters ("0-9", "A-F").

 

If you chose 256-bit WEP, then enter 29 ASCII characters or 58 hexadecimal

 

characters ("0-9", "A-F").

 

You must configure at least one key, only one key can be activated at any one time.

 

The default key is key 1.

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

Reset

Click Reset to reload the previous configuration for this screen.

 

 

4.3.3 WPA-PSK/WPA2-PSK

Click Network > Wireless LAN to display the General screen.

Figure 37 Wireless: WPA-PSK/WPA2-PSK

74

Chapter 4 Wireless LAN