The following table describes the fields in this screen.
Table 20 Wizard Step 3: WAN MAC Address
LABEL | DESCRIPTION |
|
|
Factory Default | Select Factory Default to use the factory assigned default MAC address. |
|
|
Clone the | Select this option and enter the IP address of the computer on the LAN whose |
computer’s MAC | MAC you are cloning. It is advisable to clone the MAC address from a computer |
address | on your LAN even if your ISP does not presently require MAC address |
| authentication. |
Set WAN MAC | Select this option and enter the MAC address you want to use. |
Address |
|
Back | Click Back to return to the previous screen. |
|
|
Next | Click Next to continue. |
|
|
Exit | Click Exit to close the wizard screen without saving. |
|
|
3.5 Connection Wizard: STEP 4: Bandwidth management
Bandwidth management allows you to control the amount of bandwidth going out through the ZyXEL Device’s WAN, LAN or WLAN port and prioritize the distribution of the bandwidth according to the traffic type. This helps keep one service from using all of the available bandwidth and shutting out other users.
Figure 30 Wizard Step 4: Bandwidth Management
The following fields describe the label in this screen.
Table 21 Wizard Step 4: Bandwidth Management
LABEL | DESCRIPTION |
|
|
Enable BM for all traffic | Select the check box to have the ZyXEL Device apply bandwidth |
automatically | management to traffic going out through the ZyXEL Device’s WAN, LAN or |
| WLAN port. Bandwidth is allocated according to the traffic type |
| automatically. |
| priority. |
Back | Click Back to return to the previous screen. |
|
|
64 | Chapter 3 Connection Wizard |