The following table describes the LEDs.
Table 1 Front Panel LEDs
LED | COLOR | STATUS | DESCRIPTION | |
|
|
|
| |
PWR | Green | On | The ZyXEL Device is receiving power and functioning | |
|
|
| properly. | |
|
| Blinking | The ZyXEL Device is performing testing. | |
|
|
|
| |
| Red | On | Power to the ZyXEL Device is too low. | |
|
|
|
| |
| None | Off | The ZyXEL Device is not receiving power. | |
|
|
|
| |
LAN | Green | On | The ZyXEL Device has a successful 10Mb Ethernet | |
|
|
| connection. | |
|
| Blinking | The ZyXEL Device is sending/receiving data. | |
|
|
|
| |
| Amber | On | The ZyXEL Device has a successful 100Mb Ethernet | |
|
|
| connection. | |
|
| Blinking | The ZyXEL Device is sending/receiving data. | |
|
|
|
| |
| None | Off | The LAN is not connected. | |
|
|
|
| |
WAN | Green | On | The ZyXEL Device has a successful 10Mb WAN | |
|
|
| connection. | |
|
| Blinking | The ZyXEL Device is sending/receiving data. | |
|
|
|
| |
| Amber | On | The ZyXEL Device has a successful 100Mb Ethernet | |
|
|
| connection. | |
|
| Blinking | The ZyXEL Device is sending/receiving data. | |
|
|
|
| |
| None | Off | The WAN connection is not ready, or has failed. | |
|
|
|
| |
A/G | Green | On | The ZyXEL Device is in IEEE 802.11b or g wireless LAN | |
|
|
| mode, but is not sending/receiving data through the | |
|
|
| wireless LAN. | |
|
| Blinking | The ZyXEL Device is sending/receiving data through the | |
|
|
| IEEE 802.11b or g wireless LAN. | |
| Amber | On | The ZyXEL Device is in IEEE 802.11a wireless LAN | |
|
|
| mode, but is not sending/receiving data through the | |
|
|
| wireless LAN. | |
|
| Blinking | The ZyXEL Device is sending/receiving data through the | |
|
|
| IEEE 802.11a wireless LAN. | |
| None | Off | The wireless LAN is not ready or has failed. | |
|
|
|
| |
OTIST | Green | Blinking | OTIST is in progress | |
|
|
|
| |
|
| On | OTIST is activated and the wireless security settings are | |
|
|
| given to a wireless client. The LED remains on unless | |
|
|
| the WLAN settings are changed. | |
| None | Off | OTIST is not activated or WLAN settings are manually | |
|
|
| configured after OTIST is successful. | |
USB |
| Off | The print server connection is not ready, or has failed. | |
|
|
| ||
Green | On | The print server has a successful connection. | ||
| ||||
|
|
|
| |
|
| Blinking | The print server is sending/receiving data. | |
|
|
|
|
Chapter 1 Getting to Know Your ZyXEL Device | 35 |