P-334U/P-335U User’s Guide

15.9.1 Rule Configuration with the Pre-defined Service

To edit a bandwidth management rule for the pre-defined service in the ZyXEL Device, click the Edit icon in the Application List table of the Advanced screen. The following screen displays.

Figure 106 Bandwidth Management Rule Configuration: Pre-defined Service

The following table describes the labels in this screen.

Table 68 Bandwidth Management Rule Configuration: Pre-defined Service

LABEL

DESCRIPTION

 

 

#

This is the number of an individual bandwidth management rule.

 

 

Enable

Select an interface’s check box to enable bandwidth management on that

 

interface.

Direction

These read-only labels represent the physical interfaces. Bandwidth management

 

applies to all traffic flowing out of the router through the interface, regardless of

 

the traffic’s source.

 

Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the

 

ZyXEL Device and be managed by bandwidth management.

Bandwidth

Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum

 

or minimum bandwidth allowed for the rule in kilobits per second.

Destination Port

This is the port number of the destination. See Table 64 on page 176 for some

 

common services and port numbers.

Source Port

This is the port number of the source. See Table 64 on page 176 for some

 

common services and port numbers.

Protocol

This is the protocol (TCP or UDP) used for the service.

 

 

OK

Click OK to save your customized settings.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

182

Chapter 15 Bandwidth Management