| |
Table 3 Web Configurator Status Screen | |
|
|
LABEL | DESCRIPTION |
|
|
- CPU Usage | This number shows how many kilobytes of the heap memory the ZyXEL Device is |
| using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL |
| Network Operating System) and is thus available for running processes like NAT and |
| the firewall. |
| The bar displays what percent of the ZyXEL Device's heap memory is in use. The bar |
| turns from green to red when the maximum is being approached. |
- Memory Usage | This number shows the ZyXEL Device's total heap memory (in kilobytes). |
| The bar displays what percent of the ZyXEL Device's heap memory is in use. The bar |
| turns from green to red when the maximum is being approached. |
System Setting |
|
|
|
- Firewall | This shows whether the firewall is active or not. |
|
|
- Bandwidth Management | This shows whether the bandwidth management is active or not. |
|
|
- UPnP | This shows whether UPnP is active or not. |
|
|
- Configuration Mode | This shows whether the advanced screens of each feature are turned on (Advanced) |
| or not (Basic). |
Interface Status |
|
|
|
Interface | This displays the ZyXEL Device port types. The port types are: WAN, LAN and |
| WLAN. |
Status | For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up |
| or connected). |
| For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is |
| disabled. |
Rate | For the LAN ports, this displays the port speed and duplex setting or N/A when the |
| line is disconnected. |
| For the WAN port, it displays the port speed and duplex setting if you’re using |
| Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and |
| Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field |
| displays N/A when the line is disconnected. |
| For the WLAN, it displays the connection type (54M or 11M) when the WLAN is |
| enabled and N/A when the WLAN is disabled. |
Summary |
|
|
|
BW MGNT Monitor | Use this screen to view the ZyXEL Device’s bandwidth usage and allotments. |
|
|
DHCP Table | Use this screen to view current DHCP client information. |
|
|
Packet Statistics | Use this screen to view port status and packet specific statistics. |
|
|
VPN Monitor | Use this screen to view the active VPN connections. |
|
|
WLAN Station Status | Use this screen to view the wireless stations that are currently associated to the |
| ZyXEL Device. |
After you enter the password, use the
Chapter 2 Introducing the Web Configurator | 41 |