P-334U/P-335U User’s Guide

15.9.2 Rule Configuration with the User-defined Service

In addition to the pre-defined services, if you want to edit a bandwidth management rule for other applications and/or subnets, click the Edit icon in the User-defined Service table of the Advanced screen. The following screen displays.

Figure 107 Bandwidth Management Rule Configuration: User-defined Service

The following table describes the labels in this screen.

Table 69 Bandwidth Management Rule Configuration: User-defined Service

LABEL

DESCRIPTION

 

 

BW Budget

Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum

 

or minimum bandwidth allowed for the rule in kilobits per second.

Destination

Enter the destination IP address in dotted decimal notation.

Address

 

Destination

Enter the destination subnet mask. This field is N/A if you do not specify a

Subnet Netmask

Destination Address. Refer to the appendices for more information on IP

 

subnetting.

Destination Port

Enter the port number of the destination. See Table 64 on page 176 for some

 

common services and port numbers.

Source Address

Enter the source IP address in dotted decimal notation.

 

 

Source Subnet

Enter the destination subnet mask. This field is N/A if you do not specify a Source

Netmask

Address. Refer to the appendices for more information on IP subnetting.

Source Port

Enter the port number of the source. See Table 64 on page 176 for some common

 

services and port numbers.

Protocol

Select the protocol (TCP or UDP) or select User defined and enter the protocol

 

(service type) number.

OK

Click OK to save your customized settings.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

Chapter 15 Bandwidth Management

183