Figure 77 Dynamic DNS
The following table describes the labels in this screen.
Table 44 Dynamic DNS
LABEL | DESCRIPTION |
|
|
Enable Dynamic DNS | Select this check box to use dynamic DNS. |
|
|
Service Provider | Select the name of your Dynamic DNS service provider. |
|
|
Dynamic DNS Type | Select the type of service that you are registered for from your Dynamic DNS |
| service provider. |
Host Name | Enter a host names in the field provided. You can specify up to two host |
| names in the field separated by a comma (","). |
User Name | Enter your user name. |
|
|
Password | Enter the password assigned to you. |
|
|
Enable Wildcard Option | Select the check box to enable DynDNS Wildcard. |
|
|
Enable off line option | This option is available when CustomDNS is selected in the DDNS Type |
| field. Check with your Dynamic DNS service provider to have traffic redirected |
| to a URL (that you can specify) while you are off line. |
IP Address Update Policy: | |
|
|
Use WAN IP Address | Select this option to update the IP address of the host name(s) to the WAN IP |
| address. |
Dynamic DNS server | Select this option to update the IP address of the host name(s) automatically |
auto detect IP Address | by the DDNS server. It is recommended that you select this option. |
Use specified IP | Type the IP address of the host name(s). Use this if you have a static IP |
Address | address. |
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
126 | Chapter 10 Dynamic DNS |