P-334U/P-335U User’s Guide

CHAPTER 5

Wireless Tutorial

This chapter gives you examples of how to set up an access point and wireless client for wireless communication using the following parameters. The wireless clients can access the Internet through an AP wirelessly.

5.1 Example Parameters

SSID

SSID_Example3

 

 

Channel

Auto

 

 

Security

WPA-PSK

 

(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)

 

 

802.11 mode

IEEE 802.11b/g

 

 

An access point (AP) or wireless router is referred to as “AP” and a computer with a wireless network card or USB/PCI adapter is referred to as “wireless client” here.

We use the P-334U web screens and M-302 utility screens as an example. The screens may vary slightly for different models.

5.2 Configuring the AP

Flow the steps below to configure the wireless settings on your AP.

1Set the AG switch (on the rear panel) to the G side to have the wireless client that supports IEEE 802.11b/g be able to associate with the AP.

2Open the Wireless LAN > General screen in the AP’s web configurator.

Chapter 5 Wireless Tutorial

85