P-334U/P-335U User’s Guide

Figure 7 Change Password Screen

Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the ZyXEL Device if this happens to you.

2.3 Resetting the ZyXEL Device

If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the ZyXEL Device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to “1234”.

2.3.1 Procedure to Use the Reset Button

1Make sure the PWR LED is on (not blinking).

2Press the RESET button for ten seconds or until the PWR LED begins to blink and then release it. When the PWR LED begins to blink, the defaults have been restored and the ZyXEL Device restarts.

2.4Navigating the Web Configurator

We use the P-334U web screens in this guide as an example. Screens vary slightly for different ZyXEL Device models.

The following summarizes how to navigate the web configurator from the Status screen.

38

Chapter 2 Introducing the Web Configurator