ZyXEL Communications P-334U, P-335U Key, Apply, Apply, Status, WPA-PSK, Pre-Shared, SSID_Example3, Interface Status, Device Information, Enable Wireless LAN, Auto Channel Selection

P-334U/P-335U User’s Guide

Figure 48 AP: Wireless LAN > General

3Make sure the Enable Wireless LAN check box is selected.

4Enter SSID_Example3 as the SSID, select a channel or select Auto Channel Selection to have the AP choose a channel which is not used by another AP and display the channel number in the field below after you click Apply.

5Set security mode to WPA-PSKand enter ThisismyWPA-PSKpre-sharedkeyin the Pre-Shared Key field. Click Apply.

6Open the Status screen.Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status.

86 Chapter 5 Wireless Tutorial