Chapter 7 Wireless LAN

Figure 50 Network > Wireless LAN > AP: WEP Auto

The following table describes the wireless LAN security labels in this screen.

Table 30 Network > Wireless LAN > AP: WEP Auto

LABEL

DESCRIPTION

Security Mode

Choose WEP Auto from the drop-down list box.

 

 

Passphrase

Enter a passphrase (up to 32 printable characters) and click Generate. The ZyXEL

 

Device automatically generates a WEP key.

 

 

WEP Key

The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless

 

stations must use the same WEP key for data transmission.

 

If you want to manually set the WEP key, enter any 5 or 13 characters (ASCII string)

 

or 10 or 26 hexadecimal characters ("0-9", "A-F") for a 64-bit or 128-bit WEP key

 

respectively.

 

 

7.2.3 WPA(2)-PSK

Use this screen to configure and enable WPA(2)-PSK authentication. Click Network > Wireless LAN to display the AP screen. Select WPA-PSK, WPA2-PSKor WPAPSKMixed from the Security Mode list.

110

 

P-660HN-F1 User’s Guide