Chapter 7 Wireless LAN

The following table describes the labels in this screen.

Table 33 Network > Wireless LAN > AP: Advanced Setup

LABEL

DESCRIPTION

RTS/CTS

Enter a value between 0 and 2432.

Threshold

 

 

 

Fragmentation

This is the maximum data fragment size that can be sent. Enter a value between 256

Threshold

and 2432.

 

 

Output Power

Set the output power of the ZyXEL Device. If there is a high density of APs in an area,

 

decrease the output power to reduce interference with other APs. Select one of the

 

following Maximum, Middle or Minimum.

 

 

Preamble

Select a preamble type from the drop-down list menu. Choices are Long, Short or

 

Dynamic. The default setting is Long. See the appendix for more information.

IGMP

Select this option to enable IGMP snooping on your ZyXEL Device.

Snooping

 

 

 

Back

Click this to return to the previous screen without saving.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to restore your previously saved settings.

 

 

7.2.6 MAC Filter

Use this screen to change your ZyXEL Device’s MAC filter settings. Click the Edit button in the AP screen. The screen appears as shown.

Figure 54 Network > Wireless LAN > AP: MAC Address Filter

114

 

P-660HN-F1 User’s Guide