|
| Chapter 5 WAN Setup |
| Table 18 Network > WAN > Internet Access Setup: Advanced Setup (continued) | |
| LABEL | DESCRIPTION |
| Protocol Filter | Select the protocol filter(s) to control incoming traffic. You may choose up to 4 |
|
| sets of filters. |
|
| You can configure packet filters in the Packet Filter screen. See Chapter 11 on |
|
| page 177 for more details. |
|
|
|
| Generic Filter | Select the generic filter(s) to control incoming traffic. You may choose up to 4 |
|
| sets of filters. |
|
| You can configure generic filters in the Packet Filter screen. See Chapter 11 on |
|
| page 177 for more details. |
|
|
|
| Outgoing Filter Sets |
|
|
|
|
| Protocol Filter | Select the protocol filter(s) to control outgoing traffic. You may choose up to 4 |
|
| sets of filters. |
|
| You can configure protocol filters in the Packet Filter screen. See Chapter 11 on |
|
| page 177 for more details. |
|
|
|
| Generic Filter | Select the generic filter(s) to control outgoing traffic. You may choose up to 4 |
|
| sets of filters. |
|
| You can configure generic filters in the Packet Filter screen. See Chapter 11 on |
|
| page 177 for more details. |
|
|
|
| Back | Click this to return to the previous screen without saving. |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
5.3 The More Connections Screen
The ZyXEL Device allows you to configure more than one Internet access connection. To configure additional Internet access connections click Network > WAN > More Connections. The screen differs by the encapsulation you select. When you use the WAN > Internet Access Setup screen to set up Internet access, you are configuring the first WAN connection.
Figure 33 Network > WAN > More Connections
| 75 |
|
|