Chapter 3 Status Screens
Table 6 Packet Statistics (continued)
LABEL | DESCRIPTION |
Rx B/s | This field displays the number of bytes received in the last second. |
|
|
Up Time | This field displays the elapsed time this port has been up. |
|
|
LAN Port Statistics |
|
|
|
Interface | This field displays either Ethernet (LAN ports) or Wireless (WLAN port). |
|
|
Status | For the LAN ports, this field displays Down (line is down) or Up (line is up or |
| connected). |
| For the WLAN port, it displays the transmission rate when WLAN is enabled or |
| N/A when WLAN is disabled. |
|
|
TxPkts | This field displays the number of packets transmitted on this interface. |
|
|
RxPkts | This field displays the number of packets received on this interface. |
|
|
Collisions | This is the number of collisions on this interfaces. |
|
|
Poll Interval(s) | Type the time interval for the browser to refresh system statistics. |
|
|
Set Interval | Click this to apply the new poll interval you entered in the Poll Interval field |
| above. |
|
|
Stop | Click this to halt the refreshing of the system statistics. |
|
|
3.6 Any IP Table
Click Status > AnyIP Table to access this screen. Use this screen to view the IP address and MAC address of each computer that is using the ZyXEL Device but is in a different subnet than the ZyXEL Device.
Figure 10 Any IP Table
Each field is described in the following table.
Table 7 Any IP Table
LABEL | DESCRIPTION |
# | This field is a sequential value. It is not associated with a specific entry. |
|
|
IP Address | This field displays the IP address of each computer that is using the ZyXEL Device |
| but is in a different subnet than the ZyXEL Device. |
|
|
MAC Address | This field displays the MAC address of the computer that is using the ZyXEL |
| Device but is in a different subnet than the ZyXEL Device. |
|
|
Refresh | Click this to update this screen. |
|
|
50 |
| |
| ||
|
|
|